Can small laser cutting machine be used for hand engraving?

The answer is no problem.

The difference between manual engraving and cutting is mainly that the deep layer is different. The small laser cutting machine can set the deep layer and set the deep layer lower. If the raw material of the workpiece is not cut exactly, the cutting effect is realized.

Similarly, the laser engraving machine can also be used to cut some very thin workpieces, but because the power of the laser engraving machine is small, if it is a relatively hard workpiece, the laser engraving machine can not achieve the cutting effect.

Small laser cutting machine is the laser sent from the laser generator, the loop system software, focusing into high power density laser. The laser irradiates the surface of the workpiece, so that the workpiece can achieve the melting point or melting point, and the high-pressure air on the same axis as the light will melt or vaporize the metal material.

The use of small laser cutting machine is very extensive. There are many raw materials that can be cut. Small laser cutting machine can cut acrylic board, woodworking board, fabric, leather products, metal materials, processing, medical machinery, fitness equipment, sheet metal chassis and other aspects. It can be used for different materials according to the output power width.

Optical fiber line small laser cutting machine has become an indispensable key to the metal material cutting industry, has been fast to replace the traditional machining methods. Because of the rapid development of economy, the number of orders of processing companies is increasing rapidly, and the workload of fiber laser machinery and equipment is increasing day by day. In order to ensure the on-time delivery of order information, it is very important to improve laser cutting.

In that way, in the actual metal material processing, how to operate to achieve a substantial increase in the quality of laser cutting.

1. Automatic focusing function

When cutting different data, the laser cutting equipment stipulates that the focus of laser attention is focused on different positions of the workpiece cross-section. Accurate adjustment of the spot focus position is a key factor in cutting. The method of automatic focusing is: before the light enters the condenser, assemble a variable refractive index reflective lens, and change the diffusion direction of the reflective light by changing the refractive index of the reflective lens, so as to change the focus point and complete the automatic focusing. Early small laser cutting machine, generally using manual zoom method, automatic focusing machine can save a lot of time, complete the laser cutting quality improvement.

2. Fully automatic position finding function

The full-automatic position finding function is also very important to improve laser cutting. It can recognize the inclination and starting point of the plate to be produced and processed, so as to automatically adjust the cutting process and find a good positioning angle position, so as to realize rapid cutting and prevent raw material consumption. Relying on the automatic position finding function of the small laser cutting machine, it can greatly reduce the time of repeatedly adjusting the workpiece in the past, because it is not easy to move the workpiece weighing about hundreds of kilograms on the table during cutting, thus greatly improving the production and manufacturing efficiency of all laser cutting.