coil laser cutting machineApplication of Technology Market Advantage in Machining and Manufacturing

Coil laser cutting machine with the rapid development of science and technology, as a key method of metal processing technology, laser cutting technology in machining manufacturing, especially in the field of mold manufacturing has been widely used.

Laser cutting technology is widely used in the processing of hardened steel grinding tools and alloys and other parts. It is also very suitable for the production and processing of narrow slits and complicated fine parts. The advantages of laser cutting technology can be reflected in the production and processing of extrusion dies and stamping dies.

The details are as follows: for the processing technology of large, medium and small stamping dies, laser cutting technology is generally used to carry out overall production and processing at this stage, which not only improves the matching precision of stamping dies, but also shortens the cycle time and reduces the product cost. However, for small and medium-sized concave solid model holes with complicated appearance and narrow slits or bevel angles, heat treatment is mainly carried out on the overall structure of the parts, and then production and processing are carried out, this can not only make the stamping die and production and manufacturing simple, but also ensure the precision of the die to achieve the design points, so that the traditional processing technology can not complete the left and right special-shaped surface twisted body and cone and other parts, according to the laser cutting technology can be easily carried out and the quality is good, so that the application of laser cutting technology in mechanical processing and manufacturing market prospect is wider.

　coil laser cutting machineDaily maintenance of small common sense:

1. Daily maintenance of laser light path system: After the system is in operation for a period of time, the surface of the lens will be stained with some dust. This dust will cause great harm to the transmittance of the lens and the transmittance of the lens, which may lead to the reduction of the efficiency of the laser. At this time, it is necessary to remove the dust on the lens, but be careful when removing it. The lens belongs to the broken article, be careful not to touch the glasses with sharp objects or hard pieces.

2. Daily maintenance of ash removal system: The dust collector will accumulate a lot of dust after long-term application. If it is regularly removed, it will also lead to insufficient wind speed, unsmooth smoke exhaust system, endanger the odor removal effect of exhaust pipe, and cause very large noise. During the removal process, attention must be paid to safety. First, power off and disassemble the equipment on the centrifugal fan.

3. Daily maintenance of transmission system: Dust needs to be caused during long-term laser cutting of machinery and equipment. Tiny dust can enter the machinery and equipment through the dust cover and then stick to the top of the slide rail worm. Long-term accumulation will also increase the damage of the slide rail worm. Worm slide rail is more accurate spare parts, long-term smoke accumulation in the slide rail, linear axis surface, the dimensional accuracy of the system has a great impact, and will produce corrosion in the slide rail linear axis surface, reduce the service life of the equipment.

4. Daily maintenance of refrigeration system: The water in the cold water main cabinet must be maintained regularly. Generally, it must be replaced once a week. The water quality of the cooling circulating water and the temperature of the water are directly related to the service life of the laser diode. Generally, the manufacturer will require customers to use mineral water or steamed water, and the temperature of the water is well controlled at 35 degrees. If the water tank is not changed for a long time, dirt may cause blockage of the drain pipe.