In order to guaranteeHigh power laser cutting machineIt is necessary to carry out daily maintenance of the equipment. Master the operation essentials of the equipment, you can easily cut the desired workpiece effect and extend the life of the high-power laser cutting machine. Here are some tips for daily use and maintenance.

1. The laser is the core equipment of the high-power laser cutting machine, which provides the cutting light source for the laser cutting machine; in order to make your laser cutting machine work normally and with high quality, ensure the reliable operation of your laser and extend its service life, remind You regularly check and maintain your laser. Basically, fiber optics can be maintenance-free. In addition to ensuring the cleanliness of the surroundings, it is necessary to observe whether the cooling water is normal and the voltage is normal every day. If there is any abnormality, please seek technical advice in time.

2. AttentionHigh power laser cutting machineMaintenance of lenses. Do not touch optical surfaces such as focusing lenses, protective lenses, QBH, etc. Take it directly by hand to avoid scratching or corroding the mirror. Prohibit water, detergent, etc. Clean the optical lens surface. The surface of the lens is coated with a special film, which will damage the surface of the lens if used for cleaning. Do not put the lens in a dark and humid place, which will cause the lens surface to age. When installing or replacing the reflector, focusing lens and protective lens, do not use too much pressure, otherwise it may cause lens deformation and affect the beam quality.

3. Pay attention to the maintenance of high-power laser cutting machine. Before the machine is put into use, it must be carefully lubricated in accordance with the lubrication instructions. Lubrication with a suitable lubricant is a prerequisite for maintaining the quality of the machine tool, thereby avoiding operating failures and their consequences.

If the machine tool is not used for a long time (such as ocean transportation), the lubrication of the entire machine tool should be checked. In addition, when the machine tool is not in use for a long time, please apply butter on all moving parts of the machine tool, wrap anti-embroidery paper, regularly check whether other parts are rusty, remove rust and prevent rust on the rusty parts (conditionally add dust cover), and regularly clean and inspect the machine tool.

4. Clean the entire equipment daily at specified intervals. Obvious dirt can be scrubbed off after shutdown, or sucked off with an industrial vacuum cleaner. The oil filling port and oil discharge port should be kept clean at all times. Wipe the tank and lubrication points with a lint-free cloth, do not use waste wool.

　High power laser cutting machineThe manufacturer reminds everyone that in order to ensure the normal use of your equipment and extend its service life, please read the instruction manual and maintenance manual carefully, and operate in accordance with the operating specifications. Please carefully perform the daily maintenance and maintenance steps in the user manual to ensure better and better long-term operation of the equipment. We are a manufacturer of high-power laser cutting machines. If you want to know more about this, please contact us.