coil laser cutting machineAdequate preparation before application

1. Before application, check whether the power supply voltage is consistent with the rated current of the equipment to avoid unnecessary damage.

2, check the CNC machining center cabinet table is not a stain sediment, to avoid affecting the normal laser cutting work.

3, check the industrial chiller cooling circulating water system pressure and water temperature there is no problem.

4. Check whether there is any problem with the vapor pressure assisted by laser cutting.

　coil laser cutting machineApplication steps

1. The raw materials for laser cutting will be fixed on the working table of the laser generator cutting machine.

2. According to the material and thickness of the metal material, the main parameters of the system are adjusted accordingly.

3. Select the appropriate lens and nozzle, and organize the pre-operation inspection to check its integrity and clearance.

4, according to the laser cutting thickness and laser cutting requirements, the cutting head is adjusted to the appropriate focus position.

5. Select the appropriate cutting gas and check whether the vapor is of high quality.

6. Try laser cutting raw materials. After laser cutting of raw materials, check the vertical angle of cross section, surface roughness and whether there is burr hanging slag.

7. Analyze the cross-section condition and adjust the main parameters of laser cutting until the cross-section processing technology of the sample meets the requirements.

8. Carry out the programming of product workpiece engineering drawings and the layout design of laser cutting of all PCB circuit boards, and lead them into the laser cutting system.

9, adjust the cutting head and focus spacing, ready to fully assist the vapor, gradually laser cutting.

10, the sample to carry out processing technology inspection, such as abnormal immediately adjust the main parameters, until the laser cutting process requirements.

coil laser cutting machineThe difficult problem

1. Do not adjust the position of the cutting head or laser cutting raw materials during the laser cutting work of the system to avoid scalding of the laser generator.

2. Under the condition of laser cutting, employees should observe the laser cutting steps all the time during the operation. If there is an emergency, please follow the emergency stop button immediately.

3. Fire fighting equipment can be conveniently placed around the machinery and equipment to prevent fire safety accidents caused by laser cutting of the machinery and equipment.

4. During the operation, employees should know about the switch of machinery and equipment, and turn off the switch immediately in case of emergency.

coil laser cutting machine advantages and disadvantages:

The advantages of coil laser cutting machine relative to traditional manual fiber laser cutting are clear at a glance. The working efficiency of fiber laser cutting is much higher. The advantages of electrical automation relative to traditional manual fiber laser cutting are numerous. Moreover, the fiber cutting machine is non-contact fiber laser cutting, which has less damage to the product itself. It is a kind of thermal fiber laser cutting. The edge of the product is smooth, flat and free of burrs. The expected effect of fiber laser cutting is very good, the laser generator is accurate, and the fiber laser cutting is high precision. Of course, all products are limited by their manufacturing process. The disadvantage of coil laser cutting machine is that it cannot be cut by two layers of fiber laser. After all, it is hot fiber laser cutting. Part of the edge of two layers of fiber laser cutting is easy to cause adhesion, which is extremely harmful to the expected effect of fiber laser cutting. Two layers of fiber laser cutting are not recommended.