High-power laser cutting machine should be how safe operation procedures

Fiber laser cutting is the use of laser focusing when the high power density of kinetic energy to complete. With the cooperation of computer, the single pulse is used to charge and discharge the laser, so the controllable pulse light with repeated high frequency is derived to produce light with a certain working frequency and a certain duty ratio. The single pulse laser is transmitted through the laser light path and the reflection surface and focused on the surface of an object through the focusing lens group to produce fine and high energy density light spots. The focal spots are located around the surface to be produced and processed, it is processed by melting or vaporizing raw materials at a high temperature continuously in an instant.

High power laser cutting machine should be how safe operation procedures?

1. follow the management system and strictly implement the operation procedures to run the laser generator.

2. operators must understand the structure and characteristics of high-power laser cutting machines through rigorous learning and training, and grasp the relevant professional knowledge of the actual operating system.

3. can not casually on the unknown data for laser cutting production and processing, in order to prevent the cause of major safety accidents.

When the 4. machine is running, the relevant person in charge must be present to supervise the actual operation. If you want to leave, you must turn off the power or stop the mechanical work.

5. unknown safety accidents occur during processing, the actual operation shall be temporarily stopped and reported to the superior.

What inspection work needs to be done before the high-power laser cutting machine?

1. check the working pressure of the cooling circulating water of the industrial chiller and the temperature of the water.

2. check if there is any problem with the air pressure assisted by laser cutting.

3. check whether there is dirt and sediment on the cabinet table of CNC lathe, so as not to cause normal laser cutting work.

When using the 4., check whether the power supply current is consistent with the rated current of the equipment to avoid unnecessary damage.

Standard operation process of high power laser cutting machine:

1, need to be in accordance with the requirements, in accordance with the high-power laser cutting machine equipment start, standby and other standards, do not force to close or open;

2. Employees are not allowed to operate the machine without learning and training. Only after passing complete training can they operate the machine;

3. During the operation of the high-power laser cutting machine, migrant workers cannot be close to the workbench and control panel, and the key actual operation stage needs to be carried out by professionals;

4. Negotiate the laser light path of the numerical control lathe, negotiate the cutting head under the steering mode, and follow the mandatory control steps to ensure the safety of man-machine battle;

5, each time start, take back the positioning point, check and solve the focusing lens, correct the parallelism of the light nozzle, open the laser cutting auxiliary vapor, the working pressure in the bottle should be not less than 1Mpa;

6. Check the external laser light path of the high-power laser cutting machine once a week to ensure that the steam, cold road cabinet, refrigeration river road, air compressor, cold water machine, and drain the filter to store water.