NEWS

The use of laser cutting machine_metal laser cutting machine

Release time:

2023-01-07 17:26

laser cutting machine_metal laser cutting machineThe working principle is to let the excited beam irradiate the surface of the product to generate heat, melt and evaporate the product, so as to achieve the effect of cutting. When a novice first came into contact with a metal laser cutting machine, yeslaser cutting machine_metal laser cutting machineAll the functions of the laser cutting machine are still unknown, so when operating the laser cutting machine, it is necessary to operate according to the operating procedures, especially in the correct process. You cannot use or operate indiscriminately at will. You should consult all relevant instructions at any time, or let the operators attend training to be familiar with the performance and use of the laser cutting machine, and master the relevant knowledge and contents of the operating system.

laser cutting machine_metal laser cutting machineThe method of use:

11. Switch on the switch in the distribution cabinet;

2Openlaser cutting machine_metal laser cutting machinePower lock on the operation panel, press the power button, giveCNCPower supply, switch on the power supply of the dust collector, and check whether the indicator light on the control box panel is normal;

3,CNCStop internal self-diagnosis, confirmlaser cutting machine_metal laser cutting machineNo error message appears;

42. Turn on the switch in the servo cabinet, press the servo on button on the operation panel to supply power to the servo system, turn the pulse knob on the control cabinet panel to the on position to stop the filter cartridge from recoil, and check whether the pulse is normal;

52. Try to operate, make sure that the switches and buttons on the panel are sensitive and reliable, and check whether the ash unloading valve is normal;

6Commissioning of the machine, confirmationlaser cutting machine_metal laser cutting machineSmooth operation, the limit and emergency button firm;

72. Powder spraying and marking shall be carried out in the cutting line. Pay attention to the explosion of zinc powder and prevent it from flying. At the same time, wear a mask during operation.

Related News

2023-01-05

Matters of adequate preparation before the application of coil laser cutting machine

Matters of sufficient preparation before the application of coil laser cutting machine Try to laser cut raw materials. After laser cutting of raw materials, check the vertical angle of cross section, surface roughness and whether there is burr hanging slag.

2022-12-26

What are the important key points in the application of coil laser cutting machine

What are the important key points in the application of coil laser cutting machine It should be noted that the strict implementation of safety operation procedures for reprocessing, because this is a very accurate experimental instrument, a process of use, there is careful computer system manipulation, only according to the safety operation procedures set in advance to carry out the correct actual operation, can ensure the normal operation of the actual work.

2022-12-16

Application of Coil Laser Cutting Machine Technology Market Advantage in Machining and Manufacturing

Application of Coil Laser Cutting Machine Technology Market Advantage in Machining and Manufacturing Laser cutting technology is widely used in the processing of hardened steel grinding tools and alloys and other parts. It is also very suitable for the production and processing of narrow slits and complicated fine parts. The advantages of laser cutting technology can be reflected in the production and processing of extrusion dies and stamping dies.

2022-12-06

What is the role of high-power laser cutting machine in the hardware industry?

High-power laser cutting machine in the hardware industry to play what role? The traditional hardware processing equipment is completed with a punch, a combination of polishing, cutting, bending and other processes. This kind of processing efficiency is relatively low, making a mold takes a long time and costs a lot. In addition, the country attaches great importance to energy conservation and environmental protection in the past two years, which has a certain impact on the hardware processing industry.

2022-11-28

How to use and maintain high-power laser cutting machine?

In order to ensure the normal use of high-power laser cutting machines, it is necessary to carry out daily maintenance of the equipment. Master the operation essentials of the equipment, you can easily cut the desired workpiece effect and extend the life of the high-power laser cutting machine. Here are some tips for daily use and maintenance.

Jinan Zhizhuan CNC Equipment Co., Ltd.
Email : 846338481@qq.com
Tel : +86-18678858861
WhatsApp：+86-18678858861
Add : No. 677, Hehua Road, Licheng District, Jinan City

WeChat Sweep