coil laser cutting machineEquipment is inevitable maintenance, general coil laser cutting machine equipment is not easy to problem, but we must maintain the equipment. In addition, some checks can effectively prevent the cause of some equipment failures. So, let's introduce the maintenance and maintenance of the coil laser cutting machine.

1. Daily inspection and maintenance of coil laser cutting machine

Before starting every day, pay close attention to the working pressure of the steam body and the laser cutting steam body during the work of the coil laser cutting machine. When the air pressure is insufficient, it should be removed and replaced in time.

Check whether the x-axis zero point, y-axis zero point, z-axis zero point, laser preparation and other buttons are damaged. Confirm indicator light.

Check whether the zero points of x-axis, y-axis and z-axis, travel switch and butt mounting screws fall off, and whether the travel switch of each axis is smart.

Check whether the cooling circulation water level line in the industrial chiller is sufficient. If there is any deficiency, please add it immediately.

Check the external laser light path circulation system for tap water leakage, and properly handle the leakage. Otherwise, the life of the optical glass is jeopardized.

After laser cutting every day, check the condenser lens for damage.

Inspect the external laser light path telescopic skin cavity for burning or breakage.

After daily work, remove laser cutting waste in time, clean up the work site, and keep the work site neat and clean. At the same time, in the regular cleaning of mechanical equipment, it is necessary to ensure that all parts of the mechanical equipment are clean and pollution-free, and dirt shall not be placed in all parts of the mechanical equipment.

After working every day, open the drain valve of the storage tank at the lower end of the air compressor to expand the drain pipe. After the sewage is discharged clean, close the drain valve. Standby according to the standby process, and then turn off the main switching power supply of all machine tools.

　　2、coil laser cutting machineWeekly and regular maintenance

Remove the dirt through the air outlet on time to ensure the actual effect of the exhaust.

Regularly maintain the filter device in the air supply and remove the water and dirt in the filter device in time.

Regularly maintain whether the screws of the limit switch support and the butt support fall off.

The dust on the exhaust fan filter of the electrical cabinet must be removed immediately to ensure natural ventilation to facilitate heat removal from internal electrical components.

Clean the slide rail in time, protect the skin cavity and viscera safely, avoid damage to the slide rail, and increase the service life of the slide rail.

After the machine tool is installed, it should be used for a certain period of time to solve the problem of readjusting the level of the machine tool to ensure the accuracy of the coil laser cutting machine.

Every week, the grease filling of x-axis slide rail and ball screw, y-axis slide rail and ball screw, z-axis slide rail and ball screw must be checked to maintain the lubrication of all fitness parts and increase the service life of x, y and z-axis slide rail and ball screw.

According to the natural environment of the production site, the environmental pollution of the surface of the reflective lens and the condenser lens is often (at least once a month), and the optical glass is cleaned in time to ensure its service life.

　　3、coil laser cutting machineMaintenance of optical glass for external laser light path

The surface layer of the optical glass (reflecting lens, condenser lens, etc.) does not need to be touched immediately by hand. In that case, it is easy to damage the mirror glass. Oil stains and dust on the mirror glass will seriously endanger the use of glasses lenses, and glasses lenses must be cleaned in time.

The above is the coil laser cutting machine maintenance and maintenance. If you need to know more, you can contact us at any time! Our company has many years of experience and looks forward to your joining at any time.