Hua-Russian Laser said that the fiber laser cutting machine has now become an indispensable processing equipment in the modern sheet metal industry. With the upgrading of the industry and the improvement of processing requirements, after years of design and research and development, Hua-Russian Laser has successfully launched 15 series of more than 60 models of fiber laser cutting machines, which not only has a high improvement in efficiency, but also achieves the ultimate in operation optimization, let's introduce the specific operation process.

Operation steps of fiber laser cutting machine:

1. Determine the material to be processed, fix the sheet metal material flat on the processing machine tool, and then determine the smoothness of the material placement, so as to avoid jitter during the cutting process, resulting in the cutting accuracy not reaching the requirements.

2. Operate the console, enter the product cutting pattern, as well as the thickness of the cutting material and other parameters, and then adjust the cutting head to the appropriate focus position, and then reflect and adjust the nozzle center.

3. Start the regulator and the cold water machine, set the water temperature and water pressure of the cold water machine.

4. Start the laser, and then turn on the machine.

Although the above four points are very short, it takes a lot of time to practice and get familiar with each operation detail in the actual operation process. It is inevitable that when operating the fiber laser cutting machine, there will be some failures and problems. The following is also a summary for everyone to share.

1. There is no reflection on the startup

◆ Whether the power fuse is burnt out: replace the fuse.

◆ Whether the power input is normal: check the power input and make it normal.

◆ Whether the main power switch is damaged: replace the main power switch.

2. No laser output or weak laser

◆ Whether the optical path is offset: carefully adjust the optical path.

◆ Whether the focal length of the equipment changes: readjust the focal length.

◆ Whether the laser tube is damaged or aged: replace the laser tube.

◆ Whether the laser power supply is energized: check the laser power supply circuit to make it normal.

◆ Whether the laser power supply is damaged: replace the laser power supply.

3. Processing size error or action error

◆ Whether the signal line is normal: replace the signal line.

The power supply is unstable or there is interference signal: install voltage regulator or eliminate interference signal.

◆ Whether the processing parameters are set correctly (such as layout, etc.): reset the corresponding parameters.

◆ Whether the processing program is written normally: check the written processing program and modify it until it is normal.

Jinan Zhizhuan CNC Equipment Co., Ltd,Located in the beautiful spring city of Jinan as a northern cutting intelligent application equipment R & D manufacturer,The company integrates R & D, production, sales and maintenance services, relying on cooperative R & D to promote high-tech and high-quality products. Innovative technology, and strive to be superior, the company continues to introduce advanced production technology and production technology, development and production of high-quality, cost-effective CNC equipment.