NEWS

Plasma cutting machine factory_winter antifreeze skills of CNC plasma cutting machine

Release time:

2023-01-07 17:26

Plasma cutting machine manufacturers_CNC plasma cutting machinePay attention to antifreeze, the basic principle of antifreeze is to make the coolant in the laser cutting machine not reach the "freezing point". to avoidCNC plasma cutting machineIn the cold winter due to damage caused by freezing, the following plasma cutting machine manufacturers will briefly introduce the winter antifreeze skills of CNC plasma cutting machine?

Plasma cutting machine manufacturers_CNC plasma cutting machineWinter antifreeze skills:

1. the laser cutting machine does not work, do not turn off the water cooler.

CNC plasma cutting machineAfter not working, ensure that the power supply will not be cut off (power failure), do not turn off the water cooler, so that the coolant has been in a circulating state, and at the same time, the normal temperature can be adjusted10C or so. In this way, the coolant temperature cannot reach the freezing point, so it will not be damagedCNC plasma cutting machine.

2. draining the coolant in the laser cutting machine

ByCNC plasma cutting machineTo drain the coolant in the various parts of the equipment and inject pure gas to ensure that there is no coolant in the entire water circulation cooling system. This can also guaranteeCNC plasma cutting machineIt will not be damaged by low temperature.

3. replace the coolant in the laser cutting machine

CNC plasma cutting machineAntifreeze can also be added, but be sure to choose a big brand of antifreeze, otherwise the antifreeze contains impurities, and sticking to the pipes of lasers and other components will also cause damage to the equipment. Antifreeze can not replace pure water live water as a perennial use, in the winter after the past must be replaced in time.

In addition, it should be noted that winter has passed.CNC plasma cutting machineBefore starting the operation, start the mechanical equipment, check the whole machine, make up and replace all kinds of oil and coolant in time for lack of preparation, and find out the reason for deterioration, so as to better improve the use efficiency of the equipment.

Related News

2023-01-05

Matters of adequate preparation before the application of coil laser cutting machine

Matters of sufficient preparation before the application of coil laser cutting machine Try to laser cut raw materials. After laser cutting of raw materials, check the vertical angle of cross section, surface roughness and whether there is burr hanging slag.

2022-12-26

What are the important key points in the application of coil laser cutting machine

What are the important key points in the application of coil laser cutting machine It should be noted that the strict implementation of safety operation procedures for reprocessing, because this is a very accurate experimental instrument, a process of use, there is careful computer system manipulation, only according to the safety operation procedures set in advance to carry out the correct actual operation, can ensure the normal operation of the actual work.

2022-12-16

Application of Coil Laser Cutting Machine Technology Market Advantage in Machining and Manufacturing

Application of Coil Laser Cutting Machine Technology Market Advantage in Machining and Manufacturing Laser cutting technology is widely used in the processing of hardened steel grinding tools and alloys and other parts. It is also very suitable for the production and processing of narrow slits and complicated fine parts. The advantages of laser cutting technology can be reflected in the production and processing of extrusion dies and stamping dies.

2022-12-06

What is the role of high-power laser cutting machine in the hardware industry?

High-power laser cutting machine in the hardware industry to play what role? The traditional hardware processing equipment is completed with a punch, a combination of polishing, cutting, bending and other processes. This kind of processing efficiency is relatively low, making a mold takes a long time and costs a lot. In addition, the country attaches great importance to energy conservation and environmental protection in the past two years, which has a certain impact on the hardware processing industry.

2022-11-28

How to use and maintain high-power laser cutting machine?

In order to ensure the normal use of high-power laser cutting machines, it is necessary to carry out daily maintenance of the equipment. Master the operation essentials of the equipment, you can easily cut the desired workpiece effect and extend the life of the high-power laser cutting machine. Here are some tips for daily use and maintenance.

Jinan Zhizhuan CNC Equipment Co., Ltd.
Email : 846338481@qq.com
Tel : +86-18678858861
WhatsApp：+86-18678858861
Add : No. 677, Hehua Road, Licheng District, Jinan City

WeChat Sweep