NEWS

Common application classification of laser cutting machine_CNC plasma cutting machine

Release time:

2023-01-07 17:26

laser cutting machine_CNC plasma cutting machineIt is a special equipment for plasma arc cutting processing under high temperature and strong electric field conditions. Its main working principle is that through mechanical compression, thermal compression and magnetic compression, the arc column current is dense, high temperature and high-speed airflow are generated. The high-temperature, high-speed plasma arc flame causes the workpiece metal to melt and be blown away from the substrate to form a slit. Since the arc column temperature greatly exceeds the melting point of the metal and its oxides, in addition to cutting carbon steel,laser cutting machine_CNC plasma cutting machineCan also be used to cut stainless steel, aluminum, copper and other metals.

laser cutting machine_CNC plasma cutting machineApplication classification mainly through the composition of the plasma arc to be distinguished, the following is a brief introduction:

1regular plasma arc cutting;

2, double gas plasma arc cutting, the torch uses plasma gas and shielding gas respectively. The role of the shielding gas is to form a clear isolation of the cutting area from the outside, in order to obtain a better cutting edge quality;

3, water jet plasma arc cutting, cutting process, the cooling water by the torch nozzle inside the small hole jet arc, the plasma arc again compressed, so that its density and temperature further increased. To improve the cutting speed and cutting quality;

4Long-life oxygen plasma arc cutting is a novel plasma arc cutting technology for cutting carbon steel. This kindlaser cutting machine_CNC plasma cutting machineThe outstanding advantage is that the electrode life is long, compared with ordinary oxygen plasma, the average life is extended.4~6times, the number of perforations rose nearly10times;

5Fine plasma arc cutting,laser cutting machine_CNC plasma cutting machineThe plasma arc current density is very high, so there is a very narrow and straight plasma flame. The slit is narrow, the cutting surface is smooth, the edge of the cut is vertical, the cutting accuracy and surface quality are close to laser cutting.

Related News

2023-01-05

Matters of adequate preparation before the application of coil laser cutting machine

Matters of sufficient preparation before the application of coil laser cutting machine Try to laser cut raw materials. After laser cutting of raw materials, check the vertical angle of cross section, surface roughness and whether there is burr hanging slag.

2022-12-26

What are the important key points in the application of coil laser cutting machine

What are the important key points in the application of coil laser cutting machine It should be noted that the strict implementation of safety operation procedures for reprocessing, because this is a very accurate experimental instrument, a process of use, there is careful computer system manipulation, only according to the safety operation procedures set in advance to carry out the correct actual operation, can ensure the normal operation of the actual work.

2022-12-16

Application of Coil Laser Cutting Machine Technology Market Advantage in Machining and Manufacturing

Application of Coil Laser Cutting Machine Technology Market Advantage in Machining and Manufacturing Laser cutting technology is widely used in the processing of hardened steel grinding tools and alloys and other parts. It is also very suitable for the production and processing of narrow slits and complicated fine parts. The advantages of laser cutting technology can be reflected in the production and processing of extrusion dies and stamping dies.

2022-12-06

What is the role of high-power laser cutting machine in the hardware industry?

High-power laser cutting machine in the hardware industry to play what role? The traditional hardware processing equipment is completed with a punch, a combination of polishing, cutting, bending and other processes. This kind of processing efficiency is relatively low, making a mold takes a long time and costs a lot. In addition, the country attaches great importance to energy conservation and environmental protection in the past two years, which has a certain impact on the hardware processing industry.

2022-11-28

How to use and maintain high-power laser cutting machine?

In order to ensure the normal use of high-power laser cutting machines, it is necessary to carry out daily maintenance of the equipment. Master the operation essentials of the equipment, you can easily cut the desired workpiece effect and extend the life of the high-power laser cutting machine. Here are some tips for daily use and maintenance.

Jinan Zhizhuan CNC Equipment Co., Ltd.
Email : 846338481@qq.com
Tel : +86-18678858861
WhatsApp：+86-18678858861
Add : No. 677, Hehua Road, Licheng District, Jinan City

WeChat Sweep